Новости:

Форум Infotex WeaponMod

Просмотр сообщений

В этом разделе можно просмотреть все сообщения, сделанные этим пользователем.


Сообщения - M0MBN

Страницы: [1] 2
1
Thanks I did try and read it from the radio but it does not read using the experimental cps and it does not write either if you can mention it to whoever fixes the CPS bugs.
Now I can have my other gd77 firmware radio the same colours.

thanks again

2
Hi , If possible can you post the Theme from the radio , as the CPS does not seem to read it correctly and I would like to make a backup of it. thanks

3
Well I decided to put OpenDM32 on the radio...

Before with the baofeng firmware I listen to a radio system and the radio would freeze lockup and be of no use and i would have to remove the battery.
With OpenDM32 , listen to same radio system and it does not freeze or lockup the radio like before.

So looking forward to the finished version to be released , this has made the radio much better , before it was garbage junk , now its worth using again.

thanks for the hard work so far.... cant wait for the final version.

5
no download link provided for OpenUV008_Flasher_v1 software in the instructions

6

deleted wrong post

7
Thanks for this but I will wait for the full version to be released before I even attempt to put this on my DM32.
Some people have no patience to wait...

8
YT1RXA Райко, Белград, Сербия.
Приятно познакомиться RA4FHE Алексей.
Прошивка OpenDM32 в процессе разработки, на текущем этапе Роджер VK3KYY исправляет текущие баги прошивки.
Переход с оригинальной прошивки Baofeng на OpenDM32 максимально простой. Данный функционал уже добавлен в CPS OpenGD77



This cps software has many bugs for example the new MD-UV380 PLUS 10W radio the software says it does not have a colour screen when attempting to write the theme to the radio , It wont write the theme

9
Тест приёма DMR https://youtu.be/sVS7dHA3rqY  ;)
Прямая ссылка http://infotex58.ru/infot/dm-32/open_dm32/opendm32_rx_dmr.mp4

Looks really nice so far , Hope there is an option to turn the voice off.

10
Трансиверы, приемники КВ/УКВ / Re: OpenDM-32
« : 25 Апреля 2026, 21:39:24 »
How much longer before a version is released?
I can't give you a specific date. I can say one thing, the process is ongoing...

Maybe next year then.....

11
Трансиверы, приемники КВ/УКВ / Re: OpenDM-32
« : 28 Марта 2026, 19:53:18 »
is there a predicted release date for OpenDm32?

How much longer before a version is released?

12
Трансиверы, приемники КВ/УКВ / Re: OpenDM-32
« : 27 Февраля 2026, 22:38:51 »
Thank you for posting the link to the CPS with added DM32 support. Looking forward to the release of OpenDM32 firmware cant wait to get rid of the baofeng junk firmware and run OpenDM32 on this radio.

13
Трансиверы, приемники КВ/УКВ / Re: OpenDM-32
« : 13 Февраля 2026, 16:11:41 »
Cant wait to see the finished verion of opendm32 will make this radio worth using and the baofeng firmware is so junk and buggy

14
Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32
« : 03 Февраля 2026, 17:03:36 »
Have just noticed its off frequency on recieve above 400mhz tx is fine rx is off

I need details, record a video of the work and send it to me by email.

The radio for example will tx on the 446 pmr uk band , say for example 446.00625MHz it will transmit to another radio a yaesu and its perfect. But on RX from a yaesu to the DM32 its deaf as a post on the same freq... go up a few steps and then its rx'ing so the RX is way off , anyway the radio has gone in the trash its garbage

15
Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32
« : 19 Января 2026, 21:41:06 »
Have just noticed its off frequency on recieve above 400mhz tx is fine rx is off , i guess this radios going in the bin now.

Страницы: [1] 2