Сообщения

1

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 29 Сентября 2026, 16:27:27 »

thadrumr, is the scan feature on your DM-32 working with this latest firmware?  I find that my radio will scan, but it won't stop on any active transmissions.

2

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 28 Сентября 2026, 16:22:20 »

I tried the re-uploaded file.

The DPL issue is fixed.

Scanning not working properly.  It won't stop on an active channel.

3

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 27 Сентября 2026, 21:53:43 »

I can't tell any difference between either of the two .bin files above.

The failure to send a DPL tone on transmit problem is fixed.

However, scanning isn't working correctly.  It will not stop on active channels, analog or DMR.  Only for a fraction of a second, and then it moves on.  I tried increasing the scan delay, scan dwell, and scan mode, but it made no difference.

It seems to work fine if you park it on a single channel.

4

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 27 Сентября 2026, 18:45:53 »

This update appears to have fixed the DCS issue that I reported before.  Thanks!

5

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 27 Августа 2026, 17:01:13 »

Thanks for the info!

6

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 26 Августа 2026, 23:38:09 »

I agree.   I actually like this firmware compared to the stock DM-32 firmware. 

I've found two major issues:

The radio will occasionally freeze up; turning the radio off doesn't turn it off.  You have to pull the battery and re-start ,.
The radio does not send DPL codes on transmit (RX is okay).  So any local repeaters using DPL cannot be accessed.  CTCSS works fine.

I hope the developer reads this forum.  I would really like to see this new firmware continue to evolve. 

7

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 26 Августа 2026, 03:39:19 »

Roger's answer was to send me back to this website.  He apparently has nothing to do with the OpenDM32, which is the DM32 version of OpenGD77.

8

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 25 Августа 2026, 18:56:50 »

      The official OpenGD77 Forum has been closed to new posts and converted to an archive due to heavy bot traffic

9

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 24 Августа 2026, 00:54:00 »

I'm trying to load firmware .bin file "OpenGD77_DM32_20260711.bin".  Just opening the .bin file in the OpenGD77 CPS cause the CPS to freeze.  The CPS is version E2026.7.13.01.

It is NOT the programming cable, because it happens even if the cable isn't plugged in.

EDIT: I tried the setup on a different PC, and it works fine.  So I'm guessing there's some sort of conflict somewhere.

10

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32 --> OpenDM-32

« : 23 Августа 2026, 00:18:54 »

How is this firmware improved over the stock firmware?  Are there any added features not in the stock firmware?

11

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32

« : 22 Мая 2026, 17:09:41 »

Thanks for your efforts in any case.  Does this color inverted version 49 have the capacity for 150,000 DMR contacts?

12

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32

« : 21 Мая 2026, 21:55:59 »

Okay, I would have liked to be able to change the background from black to white by way of a menu.  Without the ability to do this, I don't understand the point of the "RGB" vs. the "BGR" selection.  With either selection, it is difficult to select the channel and text colors I want.  Sometimes selecting RGB or BGR still doesn't come up with the color I expect.  Very confusing to me.

13

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32

« : 21 Мая 2026, 18:02:43 »

I just updated from 048 to 049.  I followed the .pdf instructions linked above. 

When I hold the two lower buttons and turn the radio on for the reset, a message appears that says "Do Not Reset!".  Why?

Also, when I go to display settings, whether I select RGB or BGR, the background is still always white.  Only the font colors change.

14

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32

« : 16 Ноября 2025, 01:01:57 »

What are the differences between the various DM-32 firmwares?  Like 047, 048, and 049?

15

Трансиверы, приемники КВ/УКВ / Re: Baofeng DM-32

« : 15 Ноября 2025, 00:33:40 »

Per my post #444 above:  The firmware for the Alinco DJ-X100T does not have a .bin file.  So where else might I look for the band limits? 

I tried the .exe programmer, but no hex value of C0 29 CD 02 (470MHz).