Baofeng DM-32 --> OpenDM-32

I'm trying to load firmware .bin file "OpenGD77_DM32_20260711.bin".  Just opening the .bin file in the OpenGD77 CPS cause the CPS to freeze.  The CPS is version E2026.7.13.01.

It is NOT the programming cable, because it happens even if the cable isn't plugged in.

EDIT: I tried the setup on a different PC, and it works fine.  So I'm guessing there's some sort of conflict somewhere.

Report this bug in the OpenGD77 forum, not here. They handle the CPS.

How is this firmware improved over the stock firmware?  Are there any added features not in the stock firmware?

I couldn't even program the DM-32 until after switching to this firmware because the factory/stock CPS and firmware were extremely buggy.

OpenGD77 was originally created for the Radioddity GD-77 but also ported to a few Baofeng handsets.  Some clubs in my area have produced codeplugs of all of the analog and DMR repeaters in the region, specifically using Open GD77 because of the simplicity and flexibility over other codeplugs.

For a somewhat older, but detailed list of features, check out this link
https://github.com/LibreDMR/OpenGD77_UserGuide/blob/master/OpenGD77_User_Guide.md

      The official OpenGD77 Forum has been closed to new posts and converted to an archive due to heavy bot traffic

      The official OpenGD77 Forum has been closed to new posts and converted to an archive due to heavy bot traffic

You can reach out to Roger VK3KYY/VK2KYF by email.  He is one of the devs behind the original OpenGD77.

Roger's answer was to send me back to this website.  He apparently has nothing to do with the OpenDM32, which is the DM32 version of OpenGD77.