Baofeng DM-32 --> OpenDM-32

Many thanks to all the developers

I just upgraded to version 0.2.0, and now DMR (and AM aircraft) is working fine. 

However, in the OpenGD77 cps, if I select "AM" as the mode for aircraft frequencies, they come up as "DMR" on the radio itself.  However, I can then change them to "AM" mode in the radio menu, and it works.

Test SSB 

http://infotex58.ru/infot/dm-32/opendmr/test_ssb.mp4

Check Radio info, see if it also show full charged

ok

Any chance to add a nuisance delete for the scan function?

Are 4FSK calibrations used?

Are 4FSK calibrations used?

Already used by RF_MOD_BIAS_CTRL register

OpenDMR 0.3.0: P25 on the Baofeng DM-32UV

OpenDMR is open firmware for the Baofeng DM-32 / DM-32UV. Version 0.3.0 adds APCO P25 Phase 1 digital voice:

P25 mode for channels and VFOs (SK1 + *), with the NAC and talk group
Simplex group calls in the clear: DM-32UV to DM-32UV, and received by MMDVM hotspots (Pi-Star)
About 250 ms from PTT to the other speaker, quicker than its own DMR
Our own IMBE vocoder and air interface, with no stock firmware code
Also new:

Power up to 10 W, set for each channel and VFO
OpenDMR CPS in the package: a codeplug editor that opens in Chrome or Edge. It writes Chinese names, P25 channels and the radio's settings.
Download and docs: https://github.com/va3bpf/OpenDMR/releases/tag/v0.3.0

For now it does simplex group calls in the clear only; encryption, private calls, repeaters and trunking are not done yet. The known issues are listed in docs/p25.md, and help is welcome. Non-commercial use only.

OpenDMR 0.3.0: P25 on the Baofeng DM-32UV

Thank you! The frame are being decoded...